Lloyd Research

Gang Programmer For Renesas R5F2127X Family
Support for the Renesas R5F2127X family is now available on the fxRAPIDO, M9000 and L9000 gang programmers using the PL521 socket module.
FULL STORY

OBRM Programmer Socket Module - PLF988
This socket module can program two special purpose OBRMs containing either flash memory or eproms.
FULL STORY

F5000 'In Circuit' Programmer
Enormous savings can be made with the F5000 programmer when it is designed into a special purpose handler for high volume production.
FULL STORY

Fast Serial 'In Circuit' Programmer
The F5000 is a new type of programmer designed for the fast serial programming of micro controllers and memories on board in a production environment and for updating products in the field.
FULL STORY

Gang Programmer Support For ST7 LITE
Two new programmer socket modules have been introduced to support the ST7 Lite range of micro controllers.
FULL STORY

fxRAPIDO - Fast Flash Programmer
The fxRAPIDO is the latest stand-alone Gang programmer for flash memory, microcontrollers and eproms from Lloyd Research who have been making programmers in the UK for over 20 years.
FULL STORY

PC2400 Eeprom programmer for field service
If an eeprom fails in a modern TV set, it can mean returning the set to a workshop for a replacement to be fitted. With the PC2400, the eeprom can be read, verified or reprogrammed ’in situ’ saving both time and money and providing a better service to the customer. An in-circuit lead is supplied complete with high quality clips for both DIL and SOIC 24CXX eeproms so that, in most cases, no de-soldering is required.
FULL STORY

H8000 In-circuit production programmer
The H8000 is a new kind of production programmer designed for programming Renesas (formerly Hitachi) H8 and H8S micro-controllers in-circuit without needing a PC.
FULL STORY

Gang Programmer for Motorola 68HC908 Family
Lloyd Research has recently released further support for gang programming Motorola’s 908 family of processors in a variety of different packages. All programming modules can be fitted to any M9000 or L9000 gang programmer. This means that up to eight devices can be gang programmed if two modules are fitted.
FULL STORY

In Circuit Programming of PIC Micro Controllers
Lloyd Research has released a gang programmer for production programming blank PICs on assembled pcbs. Up to eight individual circuits can be powered up and programmed with full control of the programmer being available over an RS232 port or manually.
FULL STORY

Gang Programming QFP PICs
Lloyd Research has recently released three new gang socket modules for programming PICs in various QFP packages. It is also possible to program PICs in circuit.
FULL STORY

Gang Programmer for Motorola 68HC908AZ60A
Lloyd Research has released a module for their M9000 and L9000 gang programmers to support Motorola’s popular processors - the 68HC908AZ60 and 68HC908AZ60A.
FULL STORY

New Micro Controller Programmer - M9000
The M9000 programmer supports about 1,200 micro controllers, eproms and flash memories in a variety of packages without using socket adaptors. Compared to using a gang universal programmer, it offers a very cost effective method of programming micro controllers from about 40 manufacturers such as Microchip, Motorola and Hitachi.
FULL STORY

Gang Programmer for Mitsubishi Microcontroller M38223E4
Up to four QFP microcontrollers can now be gang programmed on Lloyd Research’s L9000 modular programmer together with a PL375 module designed to support this family. The L9000 can be fitted with one or two identical or different modules making the system very flexible.
FULL STORY

Gang Programmer for Hitachi - 3048(F)
Lloyd Research has released a gang programming solution for programming both the flash and OTP versions of these popular processors in QFP using their L9000 modular gang programmer.
FULL STORY

Windows NT / 98 / 95 PC Software
A new software package is now available for the L9000 gang programmer. This software can be used on any L9000 programmer fitted with software version 2.DA or later.
FULL STORY

Gang Programmer for Hitachi H8 -3644
Lloyd Research has released a gang programming solution for programming both the flash and OTP versions of these popular processors in QFP using their L9000 modular gang programmer.
FULL STORY